Apperance
Workshop
Feeback
Contact us
 
Product navigation
Contact us
 
ADD : Sankekou Industry District,Jiaoxi Town,Changzhou, Jiangsu, China
TEL : 86-519-8670222
86-519-8670333
86-519-8671278
86-519-8671378
FAX : 86-519-8679578
EMAIL : market@jinlingdry.com
Series “Three-to-one” Multifunctional Drier
Series “Three-to-one” Multifunctional Drier　　　　　
Features

Filtering stage: the product will be separated from mother liquor (vacuum pumping filter). The filtering cake may reach to 200~500mm.

Rising stage: the filtering cake will be purified further and the residual mother liquor will be rinsed and dehydrated. The filtering cake and rising liquid will be mixed through twin cone revolving and final formed slurry and the suspended liquid filtering cake will be rinsed fully.

Drying stage: after the filtering cake is dehydrated, it will be loosened through revolving. Meanwhile steam in the jacket will heat to internal wall. The filtering cake will be heated and raised its temperature through heat exchange. The moisture will be evaporated quickly and the drying effect will be reached. The speed evaporation will be speeded up through the method of vacuum. The evaporated moisture will be brought out through treated medium such as nitrogen. It may speed up the dry of material and the drying effective will be raised.

Note: if the equipment is equipped with a stirring device, under certain condition, it can complete the process of crystal. The real integrative operation can be reached. Moreover in the rinsing stage it makes that the filtering cake and rinsing liquid will be mixed fully and the rinsing is rinsed fully.

Principle

The design of this machine is twin cone cylinder. One end is filtering plate and another is spraying and washing and discharge port. The jacket may pass through steam or hot water for heating internal bladder. The body of cylinder is put on the frame of machine through main shaft. One end of main shaft is the interface of steam and condensation water that can pass through steam to completer heating process and another end is pumping vacuum port in which the vacuum can be formed through vacuum pump or vacuum system and the pumping filter process can be completed as well as the evaporated vapor can be pumped out during the period of drying. Motor and speed reducer are put at the frame of machine. They will bring the body of cylinder to rotate clockwise and counterclockwise through gear transmission. It makes material turning over from up to down and from inner to out. During the period of washing, it makes material mixing fully and also complete washing process. During the period of drying, it can change the surface to be heated continuously and makes material to be heated uniformly and reach the purpose of balance drying.
Description
Vacuum filter, washing and drying multi-function drier is designed and manufactured by our factory on the basis of absorbing abroad advanced technique, principle and characteristic of  “three to one” equipment and combining domestic actual condition through optimization. It can instead of filtering and drying equipment (e.g. pump filter, press filter, twin cone drier and vacuum drying box, etc.)  it can complete all processes such as filtering, washing, drying and solid discharging within one set of equipment. It can be wide used for pharmaceutical industry, chemical industry, agrochemicals industry, foodstuff industry, etc. It is the best equipment for filtering and drying. It can realize full closed and whole process continuous production. Particularly it is suitable for the production of product that has the requirement of asepsis or toxicity. It is one set of full localization equipment. Its whole design is compact and its structural design is more reasonable and reliable. It can fully instead of imported “three to one” equipment. This product has applied CN patent.
Features of equipment

Being adapted integrative design, it simplifies procedure and reduces loss and raises the yield of product.

Every seal point has set double seal. The seal material is silicon rubber or fluororubber.

The filtering material is filtering cloth, stainless screen or powder sinter plate. According to the need of is 25mm in single side.

The classis is disassembling type. The seal effective can be reached through quick assembling bolts to clamp up and low flange. The chassis will be disassembled by cylinder of fallen to the ground, and the pull out by wheel type dolly in order to clean the filtering plate.

The body of tank can be rotated clockwise and counterclockwise. The revolution can be adjusted by transducer freely within 1~10rpm. The active shaft has automatic device.

Has set rinsing on-position, sampling on-position, steam disinfection. Prevent from polluting product, can adapt the requirement of “GMP”.

Operate at seal state. The product has not loss, no leakage and no pollution. Particularly it is suitable for material that has strong stimulating smell and toxicity.

Being operated at vacuum state, it has higher evaporated rate under low temperature. Particularly it is suitable for drying material that is thermal sensitive or is easy to oxidize, it can also be suitable for drying material that contains solvent. Moreover it can recover solvent.

Compact mechanism of equipment, occupy small area, simple operation.

Large loading amount, the loading coefficient may reach to 30%~40%.

Technical Parameters
type
VolumeL
Work Volume
L
Area(m2)
specification(mm)
Temperature
（℃）
Power(kw)
Size(mm)
HZLG-1000
1000
300-400
0.5
Ф800
40-140
4
2700*1450*2780
HZLG-1500
1500
450-600
0.63
Ф900
40-140
5.5
2850*1650*2950
HZLG-2000
2000
600-800
0.75
Ф1000
40-140
7.5
3180*1720*3280
HZLG-2500
2500
750-1000
0.8
Ф1000
40-140
7.5
3450*1800*3420
HZLG-3000
3000
900-1200
0.95
Ф1100
40-140
11
3650*2000*3650
HZLG-4000
4000
1250-1500
1.1
Ф1200
40-140
15
4000*2100*3750
HZLG-5000
5000
1600-2000
1.3
Ф1300
40-140
18.5
4300*2400*3860
Copyright(C)2007 Changzhou Jinling Drier Equipment Co.,Ltd.   Tel:86-519-8670222 88670333
Technical Support : CCEN.net